Set of three Chef knives

Name: Set of three Chef knives
Brand: James Sortor Design
Price: 750.0 USD
Availability: OutOfStock

$750.00 USD

On Sale Sold

Shipping calculated at checkout.

Product variants

A set of three kitchen knives. The blades are of AEB-L stainless steel with a hammered finish. The handles are of Stabilized and dyed Quilted Maple. Black and white G-10 spacers around another piece of stabilized and dyed Curly Maple (red) Bog Oak (black). The third, has Vulcanized paper spacers around white Acrylic. The handles are oval in cross section. The colors on the blades are a product of the heat-treating process. The spacer materials match the heat-treating colors, to some degree.

Details

Blade Style: Chef/Gyuto

Blade Grind: Saber grind

Edge Grind: Double Flat

Length inch (mm): Chef 13-1/4" (337mm)

Width inch (mm): Chef 2" (50mm)

Weight oz. (grams): Chef 6-1/4 oz (177g)

Blade Length inch (mm): Chef 7-3/4" (198mm)

Blade Thickness at Spine in. (mm): 3/32" (2.3mm)

Blade Material: AEB-L stainless steel

Handle Material: Stabilized and dyed Quilted Maple

Ferrule Material: NA

Pins Material: NA

Liners Material: NA

Leather Sheath: No

Extras: None

Notes: None

How to care

How to care for a knife.

The basics of knife care are simple enough but some of it bears repeating here. Let’s start with what not to do with your knives.
1. Do not put a “good” knife into the dishwasher. This goes for any knife you care about custom or production. The heat generated in a dishwasher can ruin the heat-treatment of the blade. Once that happens the blade will never hold an edge again. The heat is also detrimental to epoxy and some handle materials.
2. Do not leave a knife wet in the sink or drying rack. “Stainless steel” will rust, it just takes longer than a non-stainless steel. Keep your knives dry.
3. Do not expect a knife to do the job of another tool. A chef knife is not a cleaver; it will not survive chopping through a beef bone. The point of a knife is not a screwdriver; the point will break off. A knife is not a pry bar; it will bend or break.
4. Do not store your knife long term in a sheath. The sheath can attract and hold moisture, causing rust on the knife.
5. Do not oil a Stainless-steel sheath knife. The oil attracts dirt and grit, which ends up in the sheath where it will scratch the blade.
6. Do not use the knife in a way it was not intended to be used. Batoning a filet knife trough a piece of wood will not end well.
7. Do not put a good knife into a drawer with other knives or tools; the edge will be damaged by these other tools.
8. Do not throw a knife unless it is a purpose-built throwing knife. They have specific point styles, blade material and heat-treatments to survive the abuse of throwing. Any other knife will break off at the point.
---

That is what you should not do with your knife while caring for it. Now, what you should do while caring for a knife.
1. Clean the knife after use. Dish soap and warm water is all you need. Dry the knife with a towel or rag and let it air dry completely before storing the knife.
2. Kitchen knives do benefit from an occasional coat of food grade oil.
3. Store kitchen knives in a wooden block or better yet, on a magnetic bar. Either one will keep your knives safe and dry.
4. Keep your knives sharp; a dull knife is a dangerous knife. It necessitates extra pressure be applied when making a cut. This is when knives slip and move suddenly leading to injuries.